ROUTING ON A STICK ~ KOMPUTER JARINGAN

ROUTING ON A STICK

Nama	Ip Address	Netmask	Gateway
Pc0	100.100.100.2	255.255.255.0	100.100.100.1
Pc1	100.100.100.3	255.255.255.0	100.100.100.1
Pc2	100.100.100.4	255.255.255.0	100.100.100.1
Pc3	111.111.111.2	255.255.255.0	111.111.111.1
Pc4	111.111.111.3	255.255.255.0	111.111.111.1
Pc5	111.111.111.4	255.255.255.0	111.111.111.1
Pc6	222.222.222.2	255.255.255.0	222.222.222.1
Pc7	222.222.222.3	255.255.255.0	222.222.222.1
Pc8	222.222.222.4	255.255.255.0	222.222.222.1

1. Kita konfigurasi routernya terlebih dahulu seperti ini:

Konfigurasinya:

Router(config)#int fa0/0

Router(config-if)#no sh

Router(config-if)#ex

Router(config)#

Router(config)#int fa0/0.10

Router(config-subif)#encapsulation dot1Q 10

Router(config-subif)#ip addresss 100.100.100.1 255.255.255.0

Router(config)#int fa0/0.20

Router(config-subif)#encapsulation dot1Q 20

Router(config-subif)#ip address 111.111.111.1 255.255.255.0

Router(config)#int fa0/0.30

Router(config-subif)#encapsulation dot1Q 30

Router(config-subif)#ip address 222.222.222.1 255.255.255.0

Router(config-subif)#no sh

Router(config-subif)#ex

Router(config)#end

Verifikasi Router:

Router(config)#do sh run

Building configuration...

interface FastEthernet0/0

no ip address

duplex auto

speed auto

interface FastEthernet0/0.10

encapsulation dot1Q 10

ip address 100.100.100.1 255.255.255.0

interface FastEthernet0/0.20

encapsulation dot1Q 20

ip address 111.111.111.1 255.255.255.0

interface FastEthernet0/0.30

encapsulation dot1Q 30

ip address 222.222.222.1 255.255.255.0

2. Konfigurasi Switchnya:

Switch#en

Switch#conf t

Enter configuration commands, one per line. End with CNTL/Z.

a. Buat nama vlan nya:

Switch(config)#vlan 10

Switch(config-vlan)#name TKJ

Switch(config-vlan)#vlan 20

Switch(config-vlan)#name RPL

Switch(config-vlan)#vlan 30

Switch(config-vlan)#name MM

Switch(config-vlan)#ex

Verifikasi Nama VLAN :

Switch(config)#do sh vlan

VLAN Name Status Ports

---- -------------------------------- --------- -------------------------------

1 default active Fa0/11, Fa0/12, Fa0/13, Fa0/14

Fa0/15, Fa0/16, Fa0/17, Fa0/18

Fa0/19, Fa0/20, Fa0/21, Fa0/22

Fa0/23, Fa0/24, Gig0/1, Gig0/2

10 TKJ active Fa0/2, Fa0/3, Fa0/4

20 RPL active Fa0/5, Fa0/6, Fa0/7

30 MM active Fa0/8, Fa0/9, Fa0/10

b. Mengarahkan port int fa0/2 - int fa0/10 ke vlan

Switch(config)#int fa0/2